Modeling and Parameter Extraction of PV Cell Using Single- and Two-Diode Model

bouchra benabdelkrim

Abstract

Photovoltaic modules operate under a large range of conditions. This combined with the fact that manufacturers provide electrical parameters at specific conditions (STC). The present study proposes a comparison between single and double diode models of solar PV system and ensures the best suited model under specific environmental condition for accurate performance prediction. An important feature of these models is that its parameters can be determined using data commonly provided by module manufacturers on their published datasheets. Accurate determination of these parameters which arose from a diversification of models and methods dedicated to their estimations is still a challenge for researchers. In this paper the single and two diode models have been studied by mathematical methods based on simulated Newton-Raphson iteration method. Newton-Raphson iteration method is solved by MATLAB simulation.

 

Full Text:

PDF

References

W. Durisch, D. Tille, A. Worz, and W. Plapp, “Characterisation ¨ of photovoltaic generators,” Applied Energy, vol. 65, no. 1–4, 2000, pp. 273–284.

A. Q. Jakhrani, A. K. Othman, A. R. H. Rigit, S. R. Samo, and S. R. Kamboh, “A novel analytical model for optimal sizing of standalone photovoltaic systems,” Energy, vol. 46, no. 1,2012, pp. 675– 682.

A. N. Celik, “A simplifed model based on clearness index for estimating yearly performance of hybrid pv energy systems,” Progress in Photovoltaics: Research and Applications, vol. 10, no. 8, 2002, pp. 545–554.

A. H. Fanney and B. P. Dougherty, “Building integrated photovoltaic test facility,” Journal of Solar Energy Engineering, vol. 123, no. 3, 2001, pp. 194–199.

M. A. Green, “Short communication: price/efciency correlations for 2004 photovoltaic modules,” Progress in Photovoltaics: Research and Applications, vol. 13, 2005, pp. 85–87.

Glass M. C., ‘Improved Solar Array Power Point Model with SPICE Realization of Generalized’, IECEC, Vol. 1,1996, pp. 286-291.

Kajihara A and Harakawa A. T., ‘Model of Photovoltaic Cell Circuits Under Partial Shading’, ICIT, 2005, pp. 866-870.

Tan Y. T., Kirschen D. S., and Jenkins N., ‘A Model of PV Generation Suitable for Stability Analysis’, IEEE Trans. Energy Converts, Vol. 19, No. 4, 2004, pp. 748-755.

A. Chatterjee, A. Keyhani, and D. Kapoor, "Identification of Photovoltaic Source Models," Energy Conversion, IEEE Transactions on, vol. PP, 2011, pp1-7.

Celik, A. N. and Acikgoz, N. “Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter models”, Applied Energy, 84, 2007, pp 1–15.

Arab, A. H., Chenlo, F., Benghanem, M.,. “Loss- of-load probability of photovoltaic water pumping systems”, Solar Energy, 76, 2004, pp713–723.

Phang JCH, Chan DSH, Philips JR. Accurate analytical method for the extraction of solar-cell model parameters. Electron Letters, 20, 1984, pp406–408.

Blas MA, Torres JL, Prieto E, Garcia A. Selecting a suitable model for characterizing photovoltaic devices. Renewable Energy, 25, 2002, pp371–380.

Kou Q, Klein A, Beckman WA. A method for estimating the long-term performance of direct-coupled PV pumping systems. Solar Energy, 64, 1998, pp 33–40.

Chenlo F, Fabero F, Alonso MC. Testing, norms, reliability and harmonization: a comparative study between indoor and outdoor measurement. Agencia EUREC, Joule. JOUII-CT92-0178, Brussels: European Commission, 1996.

Marcelo G. Villalva, Jonas R. Gazoli, and Ernesto R. Filho, "Comprehensive Approach to Modeling and Simulation of Photovoltaic Arrays ", IEEE Transactions on Power Electronics, 24, 2009, pp 1198 - 1208.

Villalva, M.G., Gazoli, J.R., Filho, E.R. Comprehensive approach to modeling and simulation of photovoltaic arrays. IEEE Trans. Power Electron. 24, 2009, pp1198–1208.

Ishaque, K., Salam, Z., Taheri, H., Shamsudin, A. A critical evaluation of EA computational methods for photovoltaic cell parameter extraction based on two diode model. Sol. Energy, 85, 2011, pp 1768–1779.

Walker, G.R.: Evaluating MPPT topologies using a Matlab PV model. Journal of Electrical & Electronics Engineering, 21, 2001, pp 49-56.

Ishaque, K., Salam, Z., Taheri, H. Simple, fast and accurate two diode model for photovoltaic modules. Sol. Energy Mater. Sol. Cells, 95 (2), 2011a, pp 586–594.

Villalva, M.G., Gazoli, J.R., Filho, E.R. Comprehensive approach to modeling and simulation of photovoltaic arrays. IEEE Trans. Power Electron. 24, 2009, pp 1198–1208.

DOI: http://dx.doi.org/10.47238/ijeca.v2i2.40

Refbacks

  • There are currently no refbacks.