Enhanced Model To Simulate The Performances Of A Steam Power Plant At Different Loads
Abstract
Thermal steam power plants are indispensable for global electricity generation. However, assessing their performances under different working loads is crucial for their enhancement. This study aims to develop a comprehensive model using Matlab to simulate the performance of an existing thermal steam power plant (Achouat plant), enhanced with regeneration and re-superheat features. Additionally, an energy analysis is conducted to evaluate its efficiency under both full and partial load conditions. This analysis aims to certify and compare the performance and parameters of different plant components across various operating loads. The obtained results demonstrate that the developed model performs well in modeling the studied plant under various loads. Moreover, the findings affirm that the plant operates most optimally at full load and higher operating loads, showcasing an overall energy efficiency ranging from 33.24% to 37.38% across operating loads from 20% to 100%.
Keywords
Full Text:
PDFReferences
Electricité et gaz. Ministère de l'énergie. https://www.energy.gov.dz/?rubrique=electricite-et-gaz (Accessed: 2024-07-09).
G.R. Ahmadi and D. Toghraie, "Energy and exergy analysis of Montazeri steam power plant in Iran," Renewable and Sustainable Energy Reviews, 2016, Vol. 56, pp. 454-463.
O. Akbari, A. Marzban, and G. Ahmadi, "Evaluation of supply boiler repowering of an existing natural gas-fired steam power plant," Applied Thermal Engineering, 2017, Vol. 124, pp. 897-910.
Z. Wang, M. Liu, H. Yan, and J. Yan, "Optimization on coordinate control strategy assisted by high-pressure extraction steam throttling to achieve flexible and efficient operation of thermal power plants," Energy, 2022, Vol. 244, p. 122676.
H. Wei, Y. Lu, Y. Yang, C. Zhang, C. He, Y. Wu, W. Li, D. Zhao, "Research on influence of steam extraction parameters and operation load on operational flexibility of coal-fired power plant," Applied Thermal Engineering, 2021, Vol. 195, pp. 117226. https://doi.org/10.1016/j.applthermaleng.2021.117226
M.M. Abdella and I.A. Nassar, "Parameters calculation of thermal power plant dynamic model using steam cycle data," Thermal Science and Engineering Progress, 2019, Vol. 9, pp. 259-265.
O.J. Khaleel, F.B. Ismail, T.K. Ibrahim, and S.H. bin Abu Hassan, "Energy and exergy of the steam power plants: A comprehensive review on the Classification, Development, Improvements and configurations," Ain Shams Engineering Journal, 2022, Vol. 13, p. 101640.
M. Elhelw, K. Saad Al Dahma, A. Attia, "Utilizing exergy analysis in studying the performance of steam power plant at two different operation mode," Applied Thermal Engineering, 2019, Vol. 150, pp. 285-293. https://doi.org/10.1016/j.applthermaleng.2019.01.003.
G.R. Ahmadi and D. Toghraie, "Energy and exergy analysis of Montazeri Steam Power Plant in Iran," Renewable and Sustainable Energy Reviews, 2016, Vol. 56, pp. 454-463.
Y.A. Cengel, "Heat transfer: a practical approach," 2nd edition, McGraw-Hill, New York ,2002.
T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. DeWitt, "Introduction to heat transfer," John Wiley & Sons, Inc., New York, 2011.
O. Morisot, "Modèle de batterie froide à eau glacée adapté à la maîtrise des consommations d'énergie en conception de bâtiments climatisés et en conduite d'installations," Doctorate theses, École nationale supérieure des mines Paris, 2000.
A.M. Patnode, "Simulation and performance evaluation of parabolic trough solar power plants," Master thesis, University of Wisconsin-Madison ,2006.
F. Lippke, "Simulation of the part-load behavior of a 30 MWe SEGS plant (No. SAND-95-1293)." Sandia National Lab. (SNL-NM), Albuquerque, NM (United States) , 1995. (Accessed: 2024-07-09).
Refbacks
- There are currently no refbacks.