Solar thermo-chemical process assisting a pressure oxidation process for co-production of electricity and metal

Omar Behar, Daniel Sbarbaro, Luis Moran, Abdelmadjid Kaddour

Abstract


The mining industry is looking at the use of solar energy to address issues related to highly variable energy prices, falling ore grades, and increasing concern about the industry’s carbon footprint. The pressure oxidation of ore sulfides is an economic alternative to the smelting process because it has the potential to reduce energy consumption and treat low-grade ores. In the pressure oxidation of ore sulfides, the purity and utilization of oxygen are key factors. Indeed, oxygen production and consumption constitute the major operating cost of the pressure oxidation process. Solar thermo-chemical looping processes have been identified as one of the most efficient pathways for the production and storage of oxygen. This study investigates the integration of a solar thermo-chemical looping process with a pressure oxidation process to treat ore sulfide and produce electricity. The analysis shows that the temperature of the cold storage tank has a strong influence on the performance of the complete system. The increase in the cold tank temperature results in a sharp decrease in the size of the receiver. This reduces the investment costs for both the solar receiver and the heliostat field. For the considered case, the useful heat of the solar receiver is 3.7 MWth when the cold tank temperature is set at 100°C. If the cold tank temperature is set at 400°C, the required useful solar heat is about 3.1 MWth and the nominal output of the gas turbine is 0.56 MWe. The analysis showed that about 80% of the useful solar heat can be used to generate oxygen when the temperature of the cold tank is as high as that of the reduction reaction


Keywords


solar thermo-chemical, pressure oxidation, energy storage, oxygen production, oxidation / reduction, solar mining process

Full Text:

PDF

References


M.E. Schlesinger, K.C. Sole, W.G. Davenport. “Extractive metallurgy of copper”, Elsevier, 2011.

T. Norgate, N. Haque. “ Energy and greenhouse gas impacts of mining and mineral processing operations”, J. Clean. Prod. Vol. 18, 2011, pp. 266 – 274.

S. Moreno-Leiva, G. Díaz-Ferrán, J. Haas, T. Telsnig, F.A. Díaz-Alvarado, R. Palma-Behnke, W. Kracht, R. Román, D. Chudinzow, L. Eltrop. “Towards solar power supply for copper production in Chile: Assessment of global warming potential using a life-cycle approach”. J. Clean. Prod. Vol. 164, 2017, pp. 242 – 249.

C. Murray, W. Platzer, J. Petersen. “Potential for solar thermal energy in the heap bioleaching of chalcopyrite in Chilean copper mining”. Miner. Eng. Vol. 100, 2017, pp. 75 – 82.

G. Pamparana,W. Kracht, J. Haas, J.M. Ortiz, W. Nowak, R. Palma-Behnke. “Studying the integration of solar energy into the operation of a semi-autogenous grinding mill. Part I: Framework, model development and effect of solar irradiance forecasting”, Miner. Eng. Vol. 137, 2019, pp. 68 – 77.

G. Pamparana,W. Kracht, J. Haas, J.M. Ortiz, W. Nowak, R. Palma-Behnke. “Studying the integration of solar energy into the operation of a semi-autogenous grinding mill. Part II: Effect of ore hardness variability, geometallurgical modeling and demand side management”, Miner. Eng. Vol. 137, 2019, pp. 53 – 67.

D. Yadav, R. Banerjee. “A review of solar thermochemical processes”. Renewable and Sustainable Energy Reviews, Vol. 54, 2016, pp. 497 – 532.

C. Green, J. Robertson, J.O. Marsden. “Pressure leaching of copper concentrates at Morenci, Arizona – 10 years of experience”, Minerals & Metallurgical Processing, Vol. 35, No. 3, 2018, pp. 109 - 116.

V.G. Papangelakis. “Mathematical modelling of an exothermic pressure leaching process”. PhD thesis. McGill university, Quebec, Canada, 1990

M. Nicolle, M. Lampi, K. Valkama, J. Karonen. “Leaching of Copper Sulphides”. Copper Cobalt Africa, incorporating the 8th Southern African Base Metals Conference Livingstone, Zambia, 6–8 July 2015.

D.H. Rubisov, V.G. Papangelakis. “Model-based analysis of pressure oxidation autoclave behaviour during process upsets”, Hydrometallurgy Vol. 39, 1995, pp. 377 - 389.

P. Haseli, M. Jafarian, G. J. Nathan. “High temperature solar thermochemical process for production of stored energy and oxygen based on CuO/Cu2O redox reactions”, Solar Energy Vol. 153, 2017, 1 – 10.

V.G. Papangelakis and G.P. “Demopoulos. Reactor Models for a Series of Continuous Stirred Tank Reactors with a Gas-Liquid-Solid Leaching System: Part II1. Model Application”, Metallurgical transactions, Vol. 23B, 1992, pp. 865.




DOI: http://dx.doi.org/10.47238/ijeca.v6i1.152

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 International Journal of Energetica

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
The content of this journal is licenced under a Creative Commons Attribution-NonCommercial 4.0 International License